*View accurate shipping rates and availability
Phoenix Shower Mixers
5 products
-
Original price $813Current price $650 SALEPhoenix Vivid Slimline Wall Bath Set 180mm Curved-Brushed Gold
Adding a new dimension to the Vivid family, Phoenix Tapware has released a selection of Vivid slimline mixers. With its slim line lever handles, th...
View full detailsIn Stock$163 Off RRPOnly 1 left! -
Original price $840Current price $499 SALEPhoenix Nostalgia Shower / Wall Mixer- Chrome/White
The Nostalgia range has an elegant, old world charm design that will be a focal point in your renovation space The Nostalgia collection has the g...
View full detailsIn Stock$341 Off RRPOnly 1 left! -
Original price $173Current price $130Phoenix Rhapsody Lever Wall Top Assemblies
A stunning classic tapware design Lever handles make it easier to turn the taps on and off 1/4 turn ceramic disc spindles Easy to read hot and ...
View full detailsIn StockEOFY Savings -
Original price $844Current price $633Phoenix Axia Wall Basin/Bath Curved Outlet Set 180mm Brushed Nickel
Beautiful designer wall mixer with a gorgeous routed handle No backplate creates a streamlined modern look International award-winning design 3/4...
View full detailsEOFY Savings -
Original price $532.95Current price $315Phoenix Vivid Slimline Shower/Wall Mixer 60mm Backplate Brushed Gold
Adding a new dimension to the Vivid family, Phoenix Tapware has released a selection of Vivid slimline mixers. With its slim line lever handles, t...
View full detailsIn StockEOFY Savings
A Phoenix shower mixer is a single-lever, wall-mounted tap that controls both water temperature and flow to the shower head with one control. Phoenix shower mixers are available across multiple finishes and range styles, suited to both new bathroom builds and shower renovations.
How a single-lever shower mixer works
Rather than separate hot and cold taps, a shower mixer uses one lever to blend hot and cold water to the desired temperature, and typically the same lever or a secondary control adjusts flow rate. This is the standard configuration in modern Australian bathrooms, replacing the twin-tap setups common in older homes. A single-lever design means less time spent adjusting two taps to find the right temperature, and it's easier to reach a consistent setting each time you shower.
Wall-mounted installation
Phoenix shower mixers are wall-mounted, sitting at a standard height within the shower recess or over the bath, connected to the hot and cold water supply behind the wall. Because the mixer is wall-mounted, its position needs to be set correctly during the rough-in plumbing stage, before wall sheeting and waterproofing are completed. If you're renovating and want to change the mixer's height or position, that needs to be confirmed with your plumber before tiling begins, moving it afterward means reopening the wall.
Matching a mixer to your shower system
A shower mixer works alongside a shower arm and head or rose to complete the shower system. Phoenix shower mixers are designed to pair with Phoenix shower arms and heads in the same finish and range, so specifying all three together keeps the shower looking and functioning as a coordinated set rather than mismatched components.
Finishes
Phoenix shower mixers are available across a range of finishes depending on the specific range, including chrome, brushed nickel and matte black. Chrome remains the most common and cost-effective choice, while matte black suits a darker, more contemporary bathroom palette. Match the mixer's finish to the shower arm, head and any basin or bath tapware in the same room.
Water efficiency
Shower mixers and the shower heads they're paired with carry a WELS (Water Efficiency Labelling Scheme) star rating, the mandatory Australian rating for water flow at standard pressure. A higher star rating reduces water use per minute, which affects both household water bills and compliance with state-based plumbing requirements on renovations and new builds. Check the WELS rating listed on the specific mixer and shower head combination before finalising a specification.
Installation and servicing
Phoenix shower mixers should be installed by a licensed plumber using standard wall-mounted fittings. Because they're a currently stocked Phoenix product line, replacement cartridges and servicing parts are straightforward to source if the mixer needs maintenance, which is worth checking against older or discontinued shower mixers being replaced in a renovation.
Frequently Asked Questions
How does a Phoenix shower mixer work?
It uses a single lever to blend hot and cold water to the desired temperature and control flow rate, replacing the separate hot and cold taps found in older bathrooms.
Where is a shower mixer installed?
Shower mixers are wall-mounted at a standard height within the shower recess or over the bath, connected to the hot and cold water supply behind the wall. Position needs to be confirmed during rough-in plumbing before tiling and waterproofing.
What finishes do Phoenix shower mixers come in?
Depending on the range, Phoenix shower mixers are available in finishes including chrome, brushed nickel and matte black. Match the finish to the shower arm, head and any other tapware in the bathroom.
Do I need to buy the shower arm and head from the same range as the mixer?
It's recommended. Phoenix shower mixers are designed to pair with matching shower arms and heads in the same finish and range, keeping the shower system looking and functioning as a coordinated set.
Are Phoenix shower mixers water efficient?
Shower mixers and their paired shower heads carry a WELS star rating as required in Australia. Check the specific rating for the mixer and head combination you're specifying against your project's water efficiency requirements.
